Brief Introduction

BL-1300

ModelBL-1300TypeStandard typeTypeReading directionFrontScanning methodSingleLaserLight sourceVisible semiconductor laser (wavelength: 660 nm)Control output85 µWPulse duration112 µsLaser classClass 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1)ReadingSupported codesCODE39, ITF, Industrial2of5, Standard2of5, COOP2of5, CODABAR, CODE128, GS1-128, CODE93, UPC/EAN, GS1 DataBarNumber of readable digits74 digits (148 digits for CODE128 with start character C)Readable bar width0.125 mm0.005"Reading distance65 to 500 mm 2.56" to 19.69"*2 (narrow bar width 1.0 mm 0.04")Focal point120 mm 4.72"Largest readable label width339 mm 13.35"*2 (distance: 350 mm 13.78", narrow bar width: 1.0 mm 0.04")PCS0.4 or moreScanning rate500 to 1,300 scans/sec. (in units of 100 scans)I/O specificationsInput terminalsNumber of inputs2 (IN1 and IN2)Input formatNo-voltage inputOutput terminalsNumber of outputs4 (OUT1, OUT2, OUT3, and OUT4)OutputNPN open collectorRated load24 VDC, 30 mALeakage current (at OFF)0.1 mA or lessResidual voltage (at ON)0.5 V or lessSerial interfaceCommunication methodConforms to EIA RS-232CCommunication speed600, 1,200, 2,400, 4,800, 9,600, 19,200, 31,250, 38,400, 57,600, 115,200 bpsSynchronization between the transmitter and receiverAsynchronousData bit length7 or 8 bitsStop bit length1 bit or 2 bitsParity checkNone, odd, evenRatingPower voltage5 VDC ±5 % Voltage consumption400 mA or lessEnvironmental resistanceEnclosure ratingIP65Ambient lightSunlight: 10,000 lux, Incandescent lamp: 6,000 luxAmbient temperature0 to +45 °C 32 to 113 °FStorage temperature-20 to +60 °C -4 to 140 °FRelative humidity35 to 85 % RH (No condensation)Operating environmentNo dust or corrosive gases presentVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsWeightApprox. 115 g*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*2 Specifications for 500-scan/second operationUse the Limited Power Source defined in UL/IEC60950-1 to comply with UL/IEC60950-1.Internal body settings are written in the internal memory area (can be rewritten 100,000 times).