ET200pro 6ES7154-4AB10-0AB0

6ES7154-4AB10-0AB0

Subscribe to get prices

Model: 6ES7154-4AB10-0AB0

Order No:

SKU: 10000003908901

Condition: New Sealed Under Guarantee

Size: 14.20 CM,16.40 CM,7.40 CM

Weight: 0.00KG

Product Selection Engineer:wuShengpeng

In Stock

Brief Introduction

6ES7154-4AB10-0AB0

SIMATIC DP, PROFINET Interface module IM 154-4 PN, High Feature for ET 200 PRO, Integrated switch, incl. termination module, connection module in PN 6ES7194-4A.00-0AA0 order separately

Description

  
 
Artikelnummer 6ES7154-4AB10-0AB0
SIMATIC DP, PROFINET INTERFACE MODULE IM154-4 PN, HIGH FEATURE FOR ET 200PRO, INTEGRATED SWITCH, INCLUSIVE TERMINATING MODULE, CONNECTING MODULE IM PN 6ES7194-4A.00-0AA0 MUST BE ORDERED SEPARATELY
General information
Vendor identification (VendorID) 0x002A
Device identifier (DeviceID) 0x0305
Supply voltage
24 V DC Yes
permissible range, lower limit (DC) 20.4 V; Unit [V]
permissible range, upper limit (DC) 28.8 V; Unit [V]
Load voltage 1L+
● Rated value (DC) 24 V
● short-circuit protection Yes; Fuse in lower part is exchangeable, the fuse on the IM-LP is not
● Reverse polarity protection Yes; against destruction
Input current
from supply voltage 1L+, max. 400 mA; Dependent on terminal module, typ. maximum value for FO connection method, full load on RWB and 20.4 V input voltage
Power losses
Power loss, typ. 6 W; Dependent on terminal module, typ. maximum value for CU connection method, full load on RWB, for FO the value is approx. 0.7 W higher
Memory
Micro Memory Card No; Internal memory medium
Address area
Addressing volume
● Inputs 256 byte
● Outputs 256 byte
Interfaces
PROFINET IO
● Automatic detection of transmission speed Yes
● Transmission rate, max. 100 Mbit/s
● Services ARP, PING, SNMP
Protocols
PROFINET IO Yes
Interrupts/diagnostics/status information
Diagnostics indication LED
● Bus fault BF (red) Yes; Additional LEDs (MAINT, P1/2 LINK, P1/2 RX/TX) available
● Group error SF (red) Yes
● Monitoring 24 V voltage supply ON (green) Yes
● Load voltage monitoring DC 24 V (green) Yes
Parameter
Diagnostic alarm 1
Hardware interrupt 1
Swapping interrupt 1
identifier-related diagnostic data 1
Module status 1
Channel-related diagnostics 1
Startup if setpoint not equal to actual configuration 1
Hot swapping of modules 1
Galvanic isolation
between backplane bus and electronics No
Isolation
Isolation checked with 500 V DC
Degree and class of protection
IP65 Yes
IP66 Yes
IP67 Yes
Ambient conditions
Operating temperature
● Min. -25 °C
● max. 55 °C
Storage/transport temperature
● Min. -40 °C
● max. 70 °C
Dimensions
Width 135 mm
Height 130 mm
Depth 59.3 mm
Weights
Weight, approx. 490 g
last modified: 08.09.2014
Unsubscribe

Discount Code

Subscribe
Please check the item(s) you are interested in. (required)

Enter email to obtain information:

Subscription successful

Price list will be sent to you by email within 24hrs.

USE : 0.014718055725098